Easy modo
Tip: the USB / OTG port we refer to is the same one used to enter recovery mode. The module provides a connection via USB RNDIS with the default IP address of 192.168.11.1. If you can't use any of these display options, you can access the user interface remotely over the network using VNC.įor this, you should connect a USB cable to the USB / OTG port of your carrier board. You must connect the HDMI cable with the board powered off and only then power it on.
#EASY MODO SERIAL#
If you are unsure, just boot the board and see what comes up on the display and the serial port debug console. (optional) if Easy Installer is not installed in your module, you need to manually Load Toradex Easy Installer.A supported Toradex Computer on Module.To use the Toradex Easy Installer you will need: See the Load Toradex Easy Installer article for instructions.
#EASY MODO INSTALL#
If your module already has an Operating System flashed: If your module already have an Operating System and you want to install another OS, you can download an Easy Installer image and load Toradex Easy Installer into the module's RAM through a host computer over USB OTG. You will be able to see the tool's interface on your screen after booting the module for the first time. In these modules, you don't need to load the tool if this is the first time you use the unit. If the module is in the factory default status: For most of the modules, Toradex Easy Installer is flashed in the factory as the default image. In this section, we will take the first steps towards installing Toradex images with Easy Installer.īefore you start, you need to have the tool loaded in the SoM memory. When you inevitably die anyway, you’ll still bring back any rewards you collected along the way like Darkness or Nectar.Getting Started with Toradex Easy Installer If you need (or just want) a boost to help you through a difficult fight (looking at you, Bone Hydra), just turn it on. That means you can toggle God Mode on and off only as needed. That means that if you die enough to increase the damage resistance to 30%, and then you turn off God Mode for a while, and then you decide to turn it back on, the damage resistance will still be 30%. The increased percentage of resistance you’ve earned (by dying multiple times) is persistent, so you can turn it off and back on without losing anything. You can turn God Mode on and off at any time during a run - even in the middle of an encounter - by going to the Settings menu and clicking the God Mode button. All that changes is the amount of damage you take when you get hit. You’ll still pick up the same items and currencies. Nothing else about the game changes with God Mode. The damage resistance from God Mode maxes out at 80%. The Damage Resistance will only increase if you have God Mode active when you die (meaning you don’t get credit for all the times you died before turning on God Mode). Instead, turning on God Mode reduces the damage you’ll take from enemies by 20%.įurther, every time you die and return to the House of Hades, that damage resistance increases by another 2%. Hades’ God Mode doesn’t make you invulnerable or make enemies weaker. In this Hades guide, we’ll introduce you to God Mode and explain its effects. There are no difficulty settings in Hades, but there is a way to make the game a little easier - and then even easier on subsequent runs.